Using the Gateway 210 Projector
8 Gently press the new lamp module into the lamp bay. The lamp module is keyed so it can only be inserted in one direction. If the lamp module does not fit, make sure that the cable connections line up with the connectors in the lamp bay.
9
10
Replace the three lamp module retaining screws.
Replace the lamp bay access panel, then replace the access panel screw.
Important Make sure that the lamp bay access panel is securely in place. If the access panel is not securely in place, the projector will not start.
11
12
Turn the projector over.
Connect the power cable and all external cables.
38 | www.gateway.com |