Gateway 400 Replacing the hard drive kit, To replace the hard drive kit:, Screws removed during this task:, Tools you need to complete this task:

Replacing Gateway 400VTX Components

Replacing the hard drive kit

Tools you need to complete this task:

Phillips #0 screwdriver

Screws removed during this task:

2 chrome 2.5 × 4.7 mm (hard drive kit)

To replace the hard drive kit:

1 Disconnect the AC adapter and modem and network cables and prepare your notebook by following the instructions in “Preparing your notebook” on page 7.

2 Turn your notebook over so the bottom is facing up.

3 Remove the battery by following the instructions in “Removing the battery” on page 8.

18 www.gateway.com