Replacing Gateway 400VTX Components

Replacing the LCD panel assembly

Tools you need to complete this task:

Flat-blade driver

- OR -

Scribe or non-marring tool

Phillips #0 screwdriver

Screws removed during this task:

4 chrome 2.5 × 3.0 mm

 

4 chrome 2.5 × 5.5 mm

 

1 chrome 2.5 × 3.0 mm

(keyboard)

 

(hinges)

 

(grounding screw)

 

 

 

 

 

5 chrome 2.0 × 3.0 mm (cooling assembly)

To replace the LCD panel assembly:

1 Disconnect the AC adapter and modem and network cables and prepare your notebook by following the instructions in “Preparing your notebook” on page 7.

2 Turn your notebook over so the bottom is facing up.

3 Remove the battery by following the instructions in “Removing the battery” on page 8.

50

www.gateway.com