Turn your notebook over so the top is facing up.
Turn your notebook over so the bottom is facing up.

Replacing Gateway 400VTX Components

Replacing the cooling assembly

Tools you need to complete this task:

Flat-blade driver

- OR -

Scribe or non-marring tool

Phillips #0 screwdriver

Screws removed during this task:

4 chrome 2.5 × 3.0 mm (keyboard)

5 chrome 2.0 × 3.0 mm (cooling assembly)

To replace the cooling assembly:

1 Disconnect the AC adapter and modem and network cables and prepare your notebook by following the instructions in “Preparing your notebook” on page 7.

2

3 Remove the battery by following the instructions in “Removing the battery” on page 8.

4

5 Remove the keyboard cover by following the instructions in “Replacing the keyboard cover” on page 25.

6 Remove the keyboard by following the instructions in “Replacing the keyboard” on page 28.

46

www.gateway.com