Turn your notebook over so the bottom is facing up.
Replacing the hard drive in the hard drive kit
Replacing the hard drive in the hard drive kit
Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
2 chrome 2.5 × 4.7 mm (hard drive kit)
2 chrome 3.0 × 3.5 mm (hard drive kit bracket)
To replace the hard drive in the hard drive kit:
1 Disconnect the AC adapter and modem and network cables and prepare your notebook by following the instructions in “Preparing your notebook” on page 7.
2
3 Remove the battery by following the instructions in “Removing the battery” on page 8.
4 Remove the hard drive kit by following the instructions in “Replacing the hard drive kit” on page 18.
www.gateway.com | 21 |