14
15
Warning
numbered holes, tighten them in numerical order.
12 Replace the screw that holds the cooling assembly to the optical drive.
13 Replace the screw that holds the cooling assembly to the LED indicator panel shielding.
When tightening the cooling assembly’s screws into the
9 At the same time as you lift, move the cooling assembly to the front of the notebook and remove it.
10 Insert the new cooling assembly into your notebook. The screw tabs should go above the optical drive tab and below the LED indicator panel shielding tab.
11 Tighten the three screws that are stamped with the numbers 1 through 3 next to them. Make sure that you tighten the screws in numerical order.
Plug in the cooling fan. Reassemble your notebook.
Replacing the cooling assembly
| www.gateway.com | 49 |
|