Gateway ATT110900764 manual Verify wireless Internet connectivity, Need more help?

4Verify wireless Internet connectivity

Verify that the Wireless Gateway is connected wirelessly to the Internet by completing the following steps:

AWrite down the Network Name (SSID) and the MAC address, shown on the top or bottom of your Gateway, in the space provided below right. The Network Name (SSID) includes “EDGE” plus the last three digits of the Gateway serial number. The MAC address is used as your PSK (Pre-shared Key) for wireless network encryption.

BGo to your computer’s Wireless Network Settings and refresh the network list.

CSelect your Network Name (SSID) from the list. You may need to scroll through the list to find your SSID.

DEnter the 12-digit PSK (Mac address) in the Password field to connect to your network.

EOpen a web browser (such as Internet Explorer, Google Chrome, or Mozilla) and enter the URL of one of your favorite websites (i.e., http://www.att.net).

The contents of the Web page are displayed.

The Wireless Gateway is pre-configured so that you can access the Internet wirelessly.

Record Your Information

You will need your Network Name (SSID) and PSK (MAC address) to configure a wireless device. This information is on the top or bottom of your Gateway:

Network Name (SSID)

E D G E

12-digit PSK/MAC Address

AT&T U-verse®

High Speed Internet Service

Replacement

Guide for

Wireless Gateway

The Wireless light will blink green.

Congratulations! You should now be wirelessly connected to the Internet.

Note: Wireless networking is possible with laptops, wireless phones, or PDAs with built-in 802.11b/g/n-Wi-Fi support.

To connect these devices to your network, use the device’s network connection wizard and check your device’s documentation for further information. You can also connect additional computers via a wired connection using any open Ethernet port on the Wireless Gateway.

If you require assistance with any part of this installation, please contact the AT&T U-verse CARE support team at 1.800.ATT.2020.

Having trouble? Many issues can be resolved in three simple steps:CLICK!1. Check your connections.

•Verify that cables, cords, and modem filters on all devices are connected as specified in steps 1A–1C. Cables usually make an audible “click” when secure.

•On the Motorola modem, if using a dual-port filter, ensure the filter is plugged into the wall jack and not the Gateway, that the green Data Cable is plugged into the DSL port on the filter, and the Phone Cable is connected to the "Phone" port on the filter.

•Be sure you are using the supplied Power Cord.

•Verify that the Motorola modem is set up correctly by connecting it directly to a computer to access the Internet.

152. Power down, power up.

SECONDS

Shut down your computer, and unplug the black Power Cord and any other devices from the back of the Gateway and Motorola modem. Wait 15 seconds and then plug devices back in, making sure the power lights are on. Then, turn your computer back on.

3. Wait for blinking indicator lights.

Wait for the Motorola modem, Wireless Gateway and Ethernet WAN lights to turn solid green. The wireless light on the Motorola modem should blink green.

Need more help?

Visit att.com/support.Call 1.800.ATT.2020

Windows and Internet Explorer are trademarks of Microsoft Corporation. Mac, Mac OS, and Safari are trademarks of Apple Computer, Inc. AT&T, the AT&T logo, and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. ©2010 AT&T Intellectual Property. All rights reserved.

Get started APPROXIMATE TOTAL TIME: 30 MINUTES

Gather materials needed for replacement of an existing Wireless Gateway:

New equipment provided in the box

Wireless Gateway

1 Power Cord

(Black)

(EdgeMarc 250 CSI Guide) ATT110900764