Creating an Ethernet network

Router Name and Domain Name - Check with your ISP to see if entries are required in these fields and, if so, what entries are required. Normally, leaving the fields blank will work.

LAN IP Address - We recommend that you accept the defaults.

WAN IP Address - If your ISP assigns you a different IP address each time you log on, click Obtain an IP Address Automatically. If your ISP requires a fixed IP address, click Specify an IP Address, then type the values provided by your ISP.

4 When you are finished entering information on the Setup page, click Apply.

5 Click the DHCP tab on the top of the screen.

6 Click the Enable checkbox, then click Apply.

7 Press the reset button on your cable or DSL modem, then restart the computer. Your network should be running. Go to “Testing your network” on page 92.

www.gateway.com

91