Gateway M350 Replacing the hard drive in the hard drive kit

Turn the notebook over so the bottom is facing up.

Replacing the hard drive in the hard drive kit

Tools you need to complete this task:

Phillips #0 screwdriver

Screws removed during this task:

2 chrome 2.5 × 6 mm (hard drive kit)

4 chrome 3 × 3.5 mm (hard drive)

To replace the hard drive in the hard drive kit:

1 Disconnect the AC adapter and modem and network cables and prepare the notebook by following the instructions in “Preparing the notebook” on page 6.

3 Remove the battery by following the instructions in “Removing the battery” on page 7.

4 Remove the hard drive kit by following the instructions in “Replacing the hard drive kit” on page 9.