Lift the palm rest assembly completely from the notebook.

Replacing Gateway M350 Components

13 Carefully insert the small flat-blade screwdriver between the touchpad cable and the black plastic hinge where the cable connects to the system board. Gently lift the hinge off the cable. The cable is now free.

14

15 Place the new palm rest assembly onto the notebook, then snap the assembly into place.

16 Replace all of the palm rest screws.

Important The three shorter screws fit into the battery bay.

17 Make sure that the black plastic hinge on the system board touchpad connector is in the raised position.

52

www.gateway.com