Replacing Gateway M350 Components

6 Remove the keyboard cover by following the instructions in “Replacing the keyboard cover” on page 19.

7 Open the keyboard compartment by following the instructions in “Replacing the keyboard” on page 23.

Important You do not need to disconnect the keyboard from the system board.

8 Gently press outward on the clip at each end of the memory module until the module tilts upward.

9 Pull the memory module out of the slot.

10 Hold the new or replacement module at a 30-degree angle and press it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay.

32

www.gateway.com