Replacing the IEEE 802.11 Mini PCI card

11 Hold the new module at a 30-degree angle and press it into the empty slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the module slot.

12 Move the antenna wires out of the way, then press the module down until it clicks into place.

13 Reattach the black antenna cable to the connector labelled MAIN or M, then reattach the light gray antenna cable to the connector labelled AUX or A.

14 Reassemble the notebook.

www.gateway.com

37