CHANGING THE BATTERY
Make sure RING/POWER switch is OFF before you replace battery.
1. Remove the battery compartment door.
2.Disconnect the cord attached to the battery pack and remove the battery pack from the handset.
3.Insert the new battery pack and connect the cord into the jack inside the handset.
4. Put the battery compartment door back on.
5.Place handset in the base to charge. If you don’t charge the handset
battery properly (for 12 hours) when you first set up the phone and/or when you install a new battery pack, the battery’s long- term performance will be compro- mised.
BATTERY SAFETY PRECAUTIONS
•Don’t disassemble, mutilate, puncture, wet, or dispose of battery in fire. Like other batteries of this type, if it is burned or punctured, it could release toxic materials which can cause injury.
•Keep batteries out of the reach of children.
RBRC
RBRC
NOTE: The RBRC seal on the battery used in your Thomson Consumer Electronics product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States. Please call
14
