GE 15432970 manual Desktop Installation

DESKTOP INSTALLATION

7

6

3

2

1

4 T/P switch

1.Make sure base plate is securely fastened.

2.Plug the telephone line cord into the PHONE LINE jack on the base and into a modular jack.

3.Plug the power supply cord into the POWER 9V DC jack on the base and into an AC outlet.

4.Set the T/P switch to T for touch-tone service, or P for pulse (rotary) service. If you don’t know which type of service you have, check with the phone company.

5.Set RING switch (on the handset) to ON.

6.Raise the base antenna.

7.Place handset in the base to charge for 12 hours. The CHARGE/PAGE light (on the base) comes on to indicate that the battery is charging. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone, performance of the battery will be compro- mised.

NOTE: Use only the Thomson power supply that is compatible with this unit. Using other adapters may damage the unit.

5