GE 15432970 manual Changing a Stored Number

CHANGING A STORED NUMBER

Use the same procedure to change a stored number as you do to store a number— you’re just moving the phone number to a different memory location.

STORING A REDIAL NUMBER

The phone must be off (PWR button ON, but no dial tone).

1.Press MEM.

2.Press RE/PA (redial/pause).

3.Press MEM.

4.Press any number key (0-9) to store the phone number in that memory location.

STORING A PAUSE IN MEMORY

Use the RE/PA button to insert a pause when a delay is needed in the dialing sequence (for example, when you must dial a 9 to get an outside line or when you must enter codes to access your bank’s information line). Each pause counts toward the 24 digit limit.

If you need to dial 9 to get an outside line and want to store a number in memory without having to dial 9 each time, you would:

1.Press MEM (phone must be off— PWR button ON, but no dial tone).

2.Press 9.

3.Press RE/PA (redial/pause).

4.Dial the phone number you want to store in memory.

5.Press MEM.

6.Press any number key (0-9) to store the phone number in that memory location.

TIP: If you need a longer pause, press RE/PA button more times.

11