GE 16223870 manual SET Tone / Pulse Tone 2 Pulse, OUT of Range

1.Make sure the handset is at the main menu. Make sure your phone is OFF (not in TALK mode).

2.Press the mute/program button until SET TONE/PULSE 1TONE 2PULSE shows in the display.

SET TONE / PULSE

1 TONE 2 PULSE

3. Use the touch-tone pad on the handset to select 1TONE or 2PULSE, or press the cid/vol ( or ) button to scroll to your selection. The default setting is 1TONE.

NOTE: Press the exit/answerer button to keep the previous setting and return to the main menu screen.

4.Press the mute/program button to save your selection, and return to the main menu. You will hear a confirmation tone.

TONE

NOTE: If you aren’t sure which dialing system you have, set the telephone to tone dialing and make a test call. If the call connects, the setting is correct. If the call does not connect, set the telephone to pulse dialing.

HANDSET REGISTRATION

TIP: During the registration process, keep your handset near the base when it displays the following:

OUT OF RANGE

You should register a handset to the base when the following shows in the display:

16