GE 16223870 manual Defaultsetting YES, Operation

3. Use the touch-tone pad on your handset to enter 1YES or 2NO, or use the cid/vol ( or ) button on your handset to scroll to your selection. 2NO is the default setting.

DEFAULTSETTING

1 YES 2NO

NOTE: If you choose YES all settings in the programmable menu return to the factory default settings.

NOTE: Press the exit/answerer button once to keep the previous setting and return to the main menu.

4.Press the mute/program button to save your selection, and return to the main menu. If you select YES, DEFAULT SETTING YES displays for two seconds.

DEFAULTSETTING

YES

HANDSET DISPLAY

OPERATION

CHARGE/IN USE INDICATOR

The charge/in use indicator is lit when the handset is correctly seated in the cradle and is charging or when the phone is on. The indicator flashes when the base pages the handset, or when you receive an incoming call.

RINGER VOLUME CONTROL

1.Make sure the handset is OFF (not in TALK mode),

2.Press the ringer button, and the display shows either one of the following messages depending if the ringer is turned OFF or ON:

20