Safety Instructions
Operating Instructions
Troubleshooting Tips
Consumer Support
About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.
1 1
5 
2 4 3
Control Settings
1StatusIndicatorLights(Indicators vary by models)The Status display tells you what is happening while the dishwasher is in operation and may flash, indicating a malfunction. The lights will come ONindicating the sequence of the dishwasher operation.
LOWDETERGENT Displayed when the SmartDispenseTM needs to be refilled with liquid or gel automatic dishwasher detergent.
NOTE:If you are not using SmartDispenseTM and you want to turn the LOWDETERGENT LED light off, press the ADDEDHEATpad 5 times within 3 seconds. You will hear 3 beeps; then the light will go off. You can turn the light back on by pressing the ADDED HEATpad 5 times within 3 seconds.
SENSING Displayed while the Clean SensorTM is measuring the amount of soil and temperature of water. The dishwasher will adjust the selected cycle to achieve optimal performance.
SANITIZED Displayed when cycle has met sanitization conditions.CLEAN Displayed when a wash cycle is complete.2Wash Programs (Selections)With the dishwasher door closed and latched, press the pad for the desired wash cycle.
NOTE:All cycle times and water usage information contained in the following section are approximate values. Actual results will depend on several factors, including but not limited to inlet temperature, household water pressure and amount of soil in the wash water.
The light above or next to the selected pad will be ONto indicate which WASHCYCLEhas been selected.
6