GE 17 Reversing The Door Swing Cont, Before You Start, 2REMOVE THE FREEZER DOOR

Installation Instructions

2

REVERSING THE DOOR SWING (CONT.)

1

BEFORE YOU START

1.1Unplug the refrigerator from its electrical outlet.

2.2With a 5/16″ hex-head socket driver, remove the screws that hold the top hinge to the cabinet.

1.2Empty all door shelves, including the dairy compartment.

CAUTION: Do not let either door drop to the floor. To do so could damage the door stop.

2REMOVE THE FREEZER DOOR

2.1 Tape the door shut with masking tape.

2.3Lift the hinge (and the shim glued to it) straight up to free the hinge pin from the socket in

the top of the door and set it aside, along with its screws.

Top Hinge

2.4Remove the tape and tilt the door away from the cabinet. Lift it off the center hinge pin.

2.5Set the door on a non-scratching surface with the outside up.

2.6Transfer the 2 screws from the opposite side of the cabinet to the screw holes vacated by the top hinge removal.

18