Installation Instructions

2REVERSING THE DOOR SWING (CONT.)

 

 

 

 

 

 

 

 

 

 

 

3

REMOVE THE FRESH FOOD

 

 

 

3

REMOVE THE FRESH FOOD

 

 

 

DOOR

 

 

 

 

DOOR (CONT.)

 

 

 

 

 

 

 

 

 

 

 

 

 

3.1 Tape the door shut with masking tape.

 

3.4 Set the door outside-up on a non-scratching

 

 

 

 

 

 

 

 

surface.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.2Using a 5/16″ hex-head socket screwdriver and a 5/16″ open-end wrench, remove the two screws holding the center hinge (and the shim glued to it) to the cabinet. Lift the center hinge to free its pin from the socket in the top of the door, and set hinge and screws aside. Be careful not to lose the center hinge spacer and washer.

3.3Remove the tape and tilt the door away from the cabinet. Lift the door from the pin in the bottom hinge bracket. (If the plastic washer sticks to the door bottom, put it back on the hinge.)

3.5Transfer the two screws from the opposite side of the cabinet to the screw holes vacated by the center hinge removal.

3.6Transfer the washer (if your model has one) to the opposite side.

3.7Take one of the screws removed in step 2 and start it in the outermost screw hole on the opposite side. Do not drive it all the way down—leave enough space under the screw head for thickness of shim and bracket.

18