A
Power
SwitchIcemaker
Green | Feeler Arm |
Power Light |
Power switch model
Feeler Arm in the STOP
Feeler Arm in (up) position the ON (down)
position
Feeler arm model
The icemaker will produce approximately
There are two types of icemakers: power switch models and feeler arm models.
If the refrigerator is operated before the water connection is made to the icemaker, set the power switch to O (off) or move the feeler arm to the STOP (up) position.
When the refrigerator has been connected to the water supply, set the power switch to the I (on) position or move the feeler arm to the ON (down) position. On power switch models, the green light will come on.
You will hear a buzzing sound each time the icemaker fills with water.
The icemaker will fill with water when it cools to 15°F. A
Throw away the first few batches of ice to allow the water line to clear.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.
On power switch models, the green power light will blink if ice cubes get stuck in the icemaker. To correct this, set the power switch to O (off) and remove the cubes. Set the power switch to I (on) to restart the icemaker. After the icemaker has been turned on again, there will be a delay of about 45 minutes before the icemaker resumes operation.
NOTE: In homes with
If your refrigerator did not already come | Check the back of the refrigerator for |
equipped with an automatic icemaker, | the specific icemaker kit needed for your |
an icemaker accessory kit is available at | model. |
extra cost. |
|
8