GE 2-931SST manual Handset Setup

HANDSET SETUP

1.Remove the battery compartment door.

2.Insert the battery into the compartment.

3.Install the battery compartment door.

4.Plug the power supply cord into the 9V DC jack on the base and into an AC outlet.

5.Place the handset in the base (facing either up or down) to charge for 12 hours.

a)Base Unit on Desk –Ê Charging of handset can be done with handset facing either Up or Down.

b)Base Unit at Wall Mount –Ê Charging of handset can be done ONLY in face-up position.

IMPORTANT: If you do not charge the handset battery properly (for 12 hours) when you first set up the phone, the battery’s long-term performance will be compromised.

10:51	8/11	25
	JOHN SMITH
	TALK
1	2	3
4	5	6
7	8	9
*	0	#

IMPORTANT: Return the handset to the base unit for at least 3 minutes once a week to reestablish the phone’s communication link. This procedure is also useful if you find it difficult getting the phone to go off hook.

6