CHANGING THE BATTERY

Your cordless handset is powered by a nickel cadmium battery pack (#5-2419). The battery pack needs to be recharged periodically. A fully charged battery gives you approximately 4 hours of talk time or 7 days of stand-by time. Return the handset to the base whenever possible to keep the battery adequately charged.

The handset runs on a consumer-replaceable, nickel-cadmium battery pack. If you experience any of the following problems, you may need to replace the battery pack: short talk time, poor sound quality, limited range, CHARGE/IN USE light fails to light. Make sure phone is OFF before you replace battery.

1.Remove the battery compartment door.

2.Remove the battery pack.

3.Insert the new battery into the compartment on the back of the handset.

4.Replace the battery compartment door.

5.Return the handset to the base unit for at least 12 hours to adequately charge a new battery pack.

BATTERY SAFETY PRECAUTIONS

Don’t disassemble, mutilate, puncture, wet, or dispose of battery in fire. Like other batteries of this type, if it is burned or punctured, it could release toxic materials which can cause injury.

Keep batteries out of the reach of children.

NOTE: The RBRC

seal on the battery

RBRC

RBRC

used in your product

indicates that we are

 

participating in a

 

program to collect

Ni-Cd

and recycle Nickel

 

Cadmium batteries throughout the United States of America. Please call 1-800-8-BATTERY for information or contact your local recycling center.

24

Page 24
Image 24
GE 2-931SST manual Changing the Battery, Keep batteries out of the reach of children