SETUP
SETTING THE RINGER VOLUME
The VOLUME HI/LO/OFF switch, located on the left side of the unit controls the ringer volume.
•OFF — The phone does not ring. Use the OFF setting when you don’t want to be disturbed. If you have an answering system, it still answers the call.
•LO — Use LO for a soft ring.
•HI — Use HI for a loud ring.
SETTING THE VOLUME LEVELS
The VOLUME switch, located on the right side of the unit controls the speaker volume for the handset and speaker. Set to desired level.
PULSE• | TONE |
• |
| HI |
LO VOLUME | • |
• |
|
VOLUME HI/LO switch
THE DISPLAY
The display shows you information, such as the current time, the duration of a call, or the phone number you are currently dialing (the last 12 digits dialed appear in the display).
| Display item | Meaning | |||
| STORE | Unit is storing a number in memory. | |||
| LOWER | Unit is storing a number in lower memory. | |||
| ALARM | Alarm is active. | |||
| SPEAKER | Speakerphone is active. | |||
| HOLD | Phone is on hold. | |||
|
|
|
|
| Battery is dead or low and needs to be replaced. |
| LOW |
|
|
| |
|
|
|
|
| |
| ABR | Unit is Auto Busy Redialing. | |||
|
|
|
|
|
|
7
