GE 200D2600P015 Replacing the light bulbs, Instructions Safety, Consumer Support Troubleshooting

Models: 200D2600P015

1 112
Download 112 pages 63.71 Kb
Page 16
Image 16
Replacing the light bulbs.

Instructions

Replacing the light bulbs.

Setting either or both controls to 0 does not remove power to the light circuit.

Instructions Safety

Refrigerator Compartment—Upper Light

Instructions Safety Unplug the refrigerator.

Refrigerator Compartment—Upper Light The bulbs are located at the top of the

Tabscompartment, inside the light shield. On some models, a screw at the front of the light shield will have to be removed.

Refrigerator Compartment—Lower Light To remove the light shield, press in on the tabs on the sides of the shield and slide forward and out.

This light is located above the top drawer. After replacing the bulb with an appliance bulb of the same or lower wattage, replace the light shield and screws (on some models). When replacing the light shield, make sure that the tabs at the back of the shield fit into the slots at the back of the light shield housing.

Tips Installation Instructions Operating Plug the refrigerator back in.

Refrigerator Compartment—Lower Light
This light is located above the top drawer.

Freezer Compartment Unplug the refrigerator.

Consumer Support Troubleshooting Remove the convertible meat drawer control knob by pulling straight out.

Dispenser Lift the light shield up and pull it out.

Manual background After replacing the bulb with an appliance bulb of the same or lower wattage, replace the shield and the knob.

Manual background Plug the refrigerator back in.

Tips Installation Instructions Operating

Freezer Compartment

Manual background Unplug the refrigerator.

Manual background Remove the shelf just above the light shield. (The shelf will be easier to remove if it is emptied first.) On some models, a screw at the top of the light shield will need to be removed.

Manual background To remove the light shield, press in on the sides, and lift up and out.

Manual background Replace the bulb with an appliance bulb of the same or lower wattage, and reinstall the light shield. When reinstalling the light shield, make sure the top tabs snap securely into place. Replace the screw (on some models).

Manual background Reinstall the shelf and plug the refrigerator back in.

Consumer Support Troubleshooting

Dispenser

Unplug the refrigerator.

Replace the bulb with a bulb of the

The bulb is located on the

same size and wattage.

 

dispenser under the control panel.

Plug the refrigerator back in.

Remove the light bulb by turning

 

it counterclockwise.

 

16

Page 16
Image 16
GE 200D2600P015 Replacing the light bulbs, Instructions Safety, Tips Installation Instructions Operating, Dispenser