GE 200D2600P015 About the automatic icemaker, Consumer Support Troubleshooting Tips, Instructions

Instructions

About the automatic icemaker.

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Installation Instructions Operating Instructions Safety

Power

Switch

Icemaker

Green	Feeler Arm
Power Light

Shelf

Ice Drawer

Pull the upper freezer shelf straight out to access the icemaker. Always be sure to replace the shelf. The shelf can be used for storage.

Automatic Icemaker

The icemaker will produce seven cubes per cycle–approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O (off) position.

When the refrigerator has been connected to the water supply, set the power switch to the l (on) position.

The icemaker will fill with water when it cools to 15°F (–10°C). A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

Consumer Support Troubleshooting Tips

Ice Storage Drawer

To access ice, pull the drawer forward.

To remove the drawer, pull it straight out and lift it past the stop location.

Ice Drawer

12