Operating Instructions Safety Instructions
About the additional features.
Not all features are on all models.
Removable Beverage RackThe beverage rack is designed to hold | To install: |
a bottle on its side. It can be attached | Line up the large part of the slots on |
to any | the top of the rack with the tabs under |
| the shelf. |
| Then slide the rack back to lock it |
| in place. |
1
2
About the refrigerator doors.
Installation Instructions
The refrigerator doors may feel different than the ones you are used to. The special door opening/closing feature makes sure the doors close all the way and are securely sealed.
When opening and closing the door you will notice a stop position. If the door is opened past this stop point, the door will remain open to allow you to load and unload food more easily. When the door is only partially open, it will automatically close.
The resistance you feel at the stop position will be reduced as the door is loaded with food.
Support Troubleshooting Tips
When the door is only partially open, it will automatically close.
Beyond this stop the door will stay open.
Door AlignmentIf doors are uneven, adjust the refrigerator door.
Using a 7/16″ socket wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)
After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.
Consumer
| 7/16″ Socket Wrench | |
To remove the base |
| |
grille, open the doors, |
| |
remove the screw at |
| |
each end of the base |
| |
grille and then pull | Raise | |
the grille straight out. | ||
|
10