Lincoln Electric IM679-A manual Options / Accessories Construction Version K1728-2, V350-PR0

C-1 ACCESSORIES C-1

OPTIONS / ACCESSORIES

CONSTRUCTION VERSION – K1728-2

•All welding modes for this model run with local out- put control and weld terminals ON (e.g. Stick, TIG, LN25 off the arc).

K930-1	TIG Module
K428,K446, K449	LN-25(Off the Arc)

•Undercarriage – K1764-1

•Valet Style Undercarriage – K1838-1

FACTORY VERSION – K1728-1 and

ADVANCED PROCESS VERSION – K1728-4

•The factory model is the construction model with the addition of the Wire Feeder/Remote Adapter.

•In this form, the V350-Pro provides the hardware to power and connect to 24, 42 or 115 VAC wire feeders.

•The advanced process model is the factory model with an advanced process panel installed in place of the standard mode panel. In this form, the V350-Pro provides access to the 5 standard weld modes (Stick Soft, Stick Crisp, TIG, CV-Wire, CV-Innershield), gouge, constant power and pulse MIG weld modes.

K857	Remote Output Control
K814	Arc Start Switch
K812	Hand Operated Amptrol
K870	Foot Operated Amptrol

Note: All of the above remote controls connect directly to the 6-pin MS-style connector on the front of the V350-Pro or with either a K864 or K876 adapter and connect it to either of the14 pin wire feeder MS-style connectors on the rear of the V350-Pro. (See Diagram in Section F-1)

K930-[ ]		TIG Module
K428, K446, K449			LN-25 *
K617	(-1 or -2) K618 (-1 or -2)		LN-742
K440	(-1), K567-1		LN-7 GMA
K1559-1, K1564-1			LN-10
K1499-1, K1521-1			DH-10

*Not recommended for pulse welding

FIELD INSTALLED OPTIONS

Options for K1728-1, and -4 Factory V350’s

•TIG Gas Control Kit – K1762-1

V350-PR0