| TROUBLESHOOTING |
| ||
|
| Observe all Safety Guidelines detailed throughout this manual |
|
|
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF MISADJUSTMENT(S)
RECOMMENDED
COURSE OF ACTION
Thermal symbol is lit | 1. Check for proper fan operation |
| 2. Check for material blocking intake |
| or exhaust louvers. |
Wire feeder won’t work. Apparently 1. Check circuit breakers by the wire
no power to wire feederfeeder receptacles on the rear of the machine. Reset
2.Check to make sure the wire feed- er is connected to the correct wire feeder receptacle. (115VAC or 24/42VAC)
3.Check the control cable between the power source and the wire feeder for continuity.
1.If all recommended possible areas of misadjustment have been checked and the problem persists,
Contact your local Lincoln
Authorized Field Service
Facility.
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
