Removing and replacing the doors.

When installing or moving the refrigerator, the doors may need to be removed in order to fit the refrigerator through a doorway.

Removing the Doors

Make sure the doors are closed and the refrigerator is unplugged.

Disconnect water line and wiring harness.

 

Near the lower hinge on the freezer side, push in on the

 

collars at each end of the coupling, and pull the water

 

line tubing from the coupling. Also, disconnect wiring

Wire Harness

harness. Pull the water line and the harness through the

 

lower rail.

Collars

Remove the hinge covers and the hinges.

 

In order to access the hinges, the hinge covers need to be removed. Remove the cover by grasping it on the sides, near the back of the cover. Push back on the cover and lift up at the back, then the front.

Hinge Cover

NOTE: DO NOT use a screwdriver to remove the cover. BE CAREFUL not to break the rear retaining tab on the hinge cover. Remove the hinges using a Torx T-20.

Remove the doors.

Carefully rotate the door to 90°. Guiding the disconnected water line and wiring harness, lift the door straight up.

NOTE: Not lifting the door straight up may damage the bottom hinge.

Place doors on a protected surface.

NOTE: Be careful not to pinch the water tubing and the wire harness at the bottom of the door.

NOTE: Do not allow the connector to contact the floor. Hard contact can damage the connector. See “Replacing the Doors.”

Safety Instructions Operating Instructions Installation Instructions

Replacing the Doors

Place doors on bottom hinges.

With the door at 90°, lower the door straight down onto the bottom hinge. Carefully close the door.

NOTE: Not lowering the door straight down onto the bottom hinge may damage the hinge.

NOTE: Do not allow the connector to contact the floor. Hard contact can damage the connector. See “Replacing the Doors.”

Replace top hinges and hinge covers.

Reinstall the top hinges using a Torx T-20. Replace the hinge covers. If the doors are not level, adjust the bottom right hinge with a 7/16″ open ended wrench.

Reconnect water line and wiring harness.

Insert water tubing back into coupling, making sure the tubing is pushed far enough into the coupling so that you no longer see the mark on the tubing. Reconnect the wiring harness.

Turn on the water supply and plug the refrigerator back in.

90

Door

Hinge Pin

Connector

21

Troubleshooting Tips Consumer Support

Page 20 Page 22
Page 21
Image 21
GE 200D2600P015 Removing and replacing the doors, Troubleshooting Tips Consumer Support, Removing the Doors
Page 20 Page 22

200D2600P015 specifications

The GE 200D2600P015 is a versatile and highly reliable generator designed by General Electric, a leader in the field of power solutions. This generator stands out for its performance, efficiency, and advanced features, making it a popular choice for a variety of applications including industrial, commercial, and backup power generation.

One of the main features of the GE 200D2600P015 is its robust design, which ensures durability and longevity under demanding conditions. Built with high-quality materials, the generator is well-equipped to handle extreme temperatures and can operate effectively in various environmental settings. This durability minimizes maintenance needs, making it a cost-effective choice for users.

The generator is equipped with a powerful 200 kW output capacity, suitable for providing substantial power requirements. Its ability to deliver consistent and stable energy makes it ideal for critical facilities that cannot afford downtime, such as hospitals and data centers. The GE 200D2600P015 also incorporates advanced technologies that enhance its performance. One of these technologies is its intelligent control system, which optimizes fuel efficiency and operational performance. This results in reduced operating costs and lower carbon emissions, aligning with growing environmental standards.

In terms of fuel efficiency, the generator features multiple operational modes, allowing users to choose the most appropriate setting for their specific needs. This flexibility not only enhances usability but also supports various fuel types, giving users more options in sourcing energy.

Additionally, the GE 200D2600P015 is designed with an emphasis on safety, featuring multiple safety systems that ensure secure operation. These include automatic shutdown mechanisms and overload protection, which protect the generator and connected equipment from damage.

The compact design of the generator facilitates easy installation and transportation, making it a practical choice for settings where space is limited. Furthermore, the generator's user-friendly interface simplifies operation and monitoring, enabling even those with minimal technical knowledge to manage power generation effectively.

In summary, the GE 200D2600P015 stands out with its robust construction, powerful output, advanced technologies for fuel efficiency, and comprehensive safety features. This generator is an excellent solution for reliable and efficient power generation across diverse applications.
Top Page Image Contents