Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For per- sonal safety, this appliance must be properly grounded.

OperatingInstructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a stan- dard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a quali- fied electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encoun- tered, it is your personal responsibility and obliga- tion to have it replaced with a properly grounded 3- prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also pre- vents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

InstallationInstructions

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

TroubleshootingTips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hard- ware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall out- let is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

CustomerService

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Page 4
Image 4
GE 22-27 owner manual OperatingInstructions, TroubleshootingTips, CustomerService
Page 3 Page 5

22-27 specifications

The GE 22-27 is a versatile and efficient locomotive designed for a variety of rail transport applications. It showcases General Electric's commitment to innovation and performance in the rail industry. The 22-27 model is particularly known for its robust engineering and technological advancements that enhance its operational capabilities.

One of the main features of the GE 22-27 is its impressive power output, which is generated by a highly efficient diesel engine. This locomotive is equipped with a state-of-the-art 12-cylinder engine that delivers an output ranging typically from 2000 to 3000 horsepower. This significant power allows the locomotive to handle heavy freight loads while maintaining reliable speed and efficiency.

In terms of technology, the GE 22-27 incorporates advanced electronic controls that optimize engine performance and fuel consumption. The use of microprocessor-based control systems provides improved diagnostics and maintenance capabilities, enabling operators to monitor the health of the locomotive in real time. By utilizing these modern technologies, the GE 22-27 reduces downtime and increases overall productivity for rail operators.

Another characteristic of the GE 22-27 is its superior traction capabilities. The locomotive features a sophisticated traction control system that ensures optimal performance on various terrains and track conditions. This system allows for better acceleration and deceleration, making it suitable for both heavy freight and passenger transport.

The design of the GE 22-27 also emphasizes operator comfort and safety. The cab is ergonomically designed with user-friendly controls, allowing for easier navigation and operation for the crew. Additionally, the locomotive is equipped with modern safety features, including advanced braking systems and enhanced visibility aids, ensuring safe operation in diverse environments.

Moreover, the GE 22-27 is built with durability in mind. Its construction incorporates high-quality materials that withstand the rigors of heavy-duty usage, resulting in a long service life with minimal maintenance needs. This durability, combined with the locomotive's efficiency, ultimately translates into lower operational costs for railway companies.

In conclusion, the GE 22-27 locomotives stand out in the rail industry due to their powerful performance, advanced technology, traction capabilities, and focus on safety and operator comfort. These characteristics make them an excellent choice for rail operators looking for a reliable and efficient locomotive solution.
Top Page Image Contents