Shut Off the Main Water Supply

Turn on the nearest faucet long enough to clear the line of water.

Safety Instructions

Install the Shutoff Valve

1

Install the shutoff valve on the nearest frequent-

ly used drinking water line.

 

Do not overtighten or you may crush the copper tubing.

Washer

Pipe Clamp

Inlet End

2 Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to con- nect into a horizontal water pipe, make the con- nection to the top or side, rather than at the bot- tom, to avoid drawing off any sediment from the

Saddle-Type

Vertical Cold Water Pipe

Operating

water pipe.

3 Drill a 1/4″ hole in the water pipe, using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe.

4 Fasten the shutoff valve to the cold water pipe with the pipe clamp.

5 Tighten the clamp screws until the sealing wash- er begins to swell.

Shutoff Valve

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

Instructions Installation

Route the Copper Tubing and Connect It to the Shutoff Valve

Route the copper tubing between the cold water line and the refrigerator.

Route the tubing through a hole drilled in the wall or floor (behind the refrigerator or adjacent base cabinet) as close to the wall as possible.

Be sure there is sufficient extra tubing [about 8 feet (244 cm) coiled into 3 turns of about 10(25 cm) diameter] to allow the refrigerator to

Saddle-Type Shutoff Valve

Packing Nut

Outlet Valve

Compression Nut

Ferrule (sleeve)

move out from the wall after installation.

Place the compression nut and ferrule (sleeve) onto the end of the tubing and connect it to the shutoff valve.

Make sure the tubing is fully inserted into the valve. Tighten the compression nut securely.

NOTE: Commonwealth of Massachusetts Plumbing Codes 248CMR shall be adhered to. Saddle valves are illegal and use is not permitted in Massachusetts. Consult with your licensed plumber.

Instructions Troubleshooting Tips

Turn On the Water and Flush Out the Tubing

1

Turn the main water supply on and flush out the

2

Shut the water off at the water valve after about

tubing until the water is clear.

one quart (1 L) of water has been flushed

through the tubing.

19

Customer Service

Page 19
Image 19
GE 22-27 owner manual Shut Off the Main Water Supply, Operating, Instructions Installation

22-27 specifications

The GE 22-27 is a versatile and efficient locomotive designed for a variety of rail transport applications. It showcases General Electric's commitment to innovation and performance in the rail industry. The 22-27 model is particularly known for its robust engineering and technological advancements that enhance its operational capabilities.

One of the main features of the GE 22-27 is its impressive power output, which is generated by a highly efficient diesel engine. This locomotive is equipped with a state-of-the-art 12-cylinder engine that delivers an output ranging typically from 2000 to 3000 horsepower. This significant power allows the locomotive to handle heavy freight loads while maintaining reliable speed and efficiency.

In terms of technology, the GE 22-27 incorporates advanced electronic controls that optimize engine performance and fuel consumption. The use of microprocessor-based control systems provides improved diagnostics and maintenance capabilities, enabling operators to monitor the health of the locomotive in real time. By utilizing these modern technologies, the GE 22-27 reduces downtime and increases overall productivity for rail operators.

Another characteristic of the GE 22-27 is its superior traction capabilities. The locomotive features a sophisticated traction control system that ensures optimal performance on various terrains and track conditions. This system allows for better acceleration and deceleration, making it suitable for both heavy freight and passenger transport.

The design of the GE 22-27 also emphasizes operator comfort and safety. The cab is ergonomically designed with user-friendly controls, allowing for easier navigation and operation for the crew. Additionally, the locomotive is equipped with modern safety features, including advanced braking systems and enhanced visibility aids, ensuring safe operation in diverse environments.

Moreover, the GE 22-27 is built with durability in mind. Its construction incorporates high-quality materials that withstand the rigors of heavy-duty usage, resulting in a long service life with minimal maintenance needs. This durability, combined with the locomotive's efficiency, ultimately translates into lower operational costs for railway companies.

In conclusion, the GE 22-27 locomotives stand out in the rail industry due to their powerful performance, advanced technology, traction capabilities, and focus on safety and operator comfort. These characteristics make them an excellent choice for rail operators looking for a reliable and efficient locomotive solution.