RWD WHEELCHAIRS | SECTION 15 |
|
|
REMOVING/INSTALLING 22NF BATTERY BOX TRAY (FIGURE 2)
REMOVING
1.Remove the battery box. Refer to
REMOVING/INSTALLING BATTERY BOXES in SECTION 9 of this manual.
2.Remove the two (2) rear locknuts that secure the battery box tray to battery mount brackets.
3.Remove the two (2) front bolts and locknuts that secure the battery box tray to the base frame.
4.Remove the battery tray from the base frame.
INSTALLING
1.Install battery tray onto base frame.
2.Secure the rear of the battery tray to battery mount brackets with existing locknuts. Torque to 160
Locknuts | Battery Mount | |
Bracket | ||
| ||
| Bolts |
Base
Frame
*Rubber |
|
|
Element | Battery Tray | Locknuts |
|
*NOTE: Illustration depicts the rubber element. Battery Box Tray removes in the same manner for shock assembly.
FIGURE 2 - REMOVING/
INSTALLING 22NF BATTERY
BOX TRAY
RWD WHEELCHAIRS
3.Secure the front of the battery tray to
the base frame with existing mounting screws and locknuts. Torque to 160
4.Reinstall the battery box. Refer to REMOVING/INSTALLING BATTERY BOXES in SECTION 9 of this manual.
CONVERTING 22NF BATTERY BOX TRAY TO GROUP 24 BATTERY BOX
REMOVING 22NF COMPONENTS (FIGURE 3)
1.Remove the battery box. Refer to REMOVING/INSTALLING BATTERY BOXES in SECTION 9 of this manual.
2.Remove the battery box tray. Refer to REMOVING/INSTALLING THE 22NF BATTERY BOX TRAY in this section of the manual.
3.Remove the wiring harness. Refer to REMOVING/INSTALLING THE WIRING HARNESS in SECTION 10 of this manual.
NOTE: The battery box tray and the battery mount brackets will not be reused. Mounting screws and spacers will be reused.
4.Remove the four (4) mounting screws that secure the battery mount brackets to the base frame.
5.Remove the battery mount brackets.
Part No. 1104849 | 121 | 3G Storm Series® Wheelchairs |
