SEAT FRAME

SECTION 6

SEAT FRAME

 

 

E.Remove the four (4) mounting screws that secure the EXISTING center frame to support brackets.

F.Remove existing center frame from seat mount plates.

G.Secure NEW center frame to support brackets with the existing four (4) mounting screws and locknuts. Torque to 156 in-lbs.

H.Secure NEW side frame to the center frame at the position noted previously. Torque to 75 in-lbs.

NOTE: If seat width adjustment is also desired, refer to CHANGING SEAT WIDTH in this section of the manual for mounting hole locations and allowable seat width/seat depth combinations.

Mounting Screws

(Torque to 156 in-lbs)

Mounting Screws

 

(Torque to

Side

75 in-lbs)

Frame

 

Coved

Washers

Spacers

Locknuts

Side Frame

Center

Frame

Support

Brackets

FIGURE 3- CHANGING SEAT DEPTH - ASBA

3G Storm Series® Wheelchairs

34

Part No. 1104849

Page 34
Image 34
Invacare Ranger X RWD, Torque SP RWD, Arrow RWD service manual Changing Seat Depth Asba