SECTION 6 | SEAT FRAME |
|
|
3. Cut tie wraps and disconnect joystick from controller.
4. | Turn the lever on the adjustment lock |
| to release the adjustment lock from |
| the joystick mounting tube. |
5. | Remove the joystick from the |
Adjustment Lock | Back Upholstery |
Lever for Joystick | (STEP 10) |
(STEP 4) |
|
SEAT FRAME
| wheelchair. |
6. | Perform one (1) of the following: |
| A. STANDARD OR |
| ASBA - Remove the |
| armrests from the wheelchair. |
| Refer to INSTALLING/REMOVING |
| FLIP BACK ARMRESTS in |
| SECTION 4 of the Owner’s |
| Manual, part number 1104782 or |
| 1123757. |
| B. VAN SEAT - Remove the mount- |
| ing screw that secures the armrest |
| to the van seat frame. Repeat for |
| opposite side. |
7. | For standard and ASBA, remove the |
| seat pan (including seat positioning |
| straps). Refer to REMOVING/IN- |
| STALLING SEAT PAN in this section |
| of the manual. |
8. | Disconnect battery and left/right motor |
| connectors from the controller. Refer |
| to REMOVING/INSTALLING WIRING |
| HARNESS in SECTION 10 of this |
| manual. |
9. | Remove |
| wiring harness to the seat frame and |
| the charger cable from its mounting |
| bracket. Refer to REMOVING/ |
| INSTALLING WIRING HARNESS in |
| SECTION 10 of this manual. |
10. | For standard and ASBA, remove the |
Battery
Boxes
(STEP 2)
Seat Positioning
Strap (STEP 7)
Height
Adjustment
Holes
Van Seat
Base
Flip Back Armrests
(STEP 6A)
Footrest
Location
(STEP 1)
Joystick
( S T E P S
3 , 5 )
Seat Pan
(Step 7)
Controller, Left/Right Motor Connectors (STEPS 8,9)
Socket Screw
back upholstery (including back canes |
and spreader bar, if applicable). Refer |
to REPLACING BACK UPHOLSTERY |
in SECTION 5 of this manual. |
FIGURE 1 - PREPARATION FOR REMOVING/INSTALLING SEAT FRAME (STANDARD FRAME, ADJUSTABLE FRAME, AND VAN SEAT)
3G Storm Series® Wheelchairs | 30 | Part No. 1104849 |
