
SECTION 6SEAT FRAME
INSTALLING/REMOVING |
|
VAN SEAT ASSEMBLY | Van Seat |
(FIGURE 7) |
|
INSTALLING VAN SEAT |
|
SEAT FRAME
1. | Position the van seat on the seat |
| mounting plates at the position shown |
| in FIGURE 7. |
2. | Line up mounting holes in the van seat |
| frame and the mounting holes in the |
| seat mounting plates. |
3. | Secure the van seat to the seat mount- |
| ing plates with four (4) mounting |
| screws, and locknuts. Torque to |
| 156 |
Seat
Mounting
Mounting ScrewsPlate
(Torque to
156
Base
Frame
Seat
Mounting
Plate
REMOVING VAN SEAT
1.Remove the four (4) mounting screws and locknuts that secure the van seat to the seat mounting plates.
2.Remove van seat from seat mounting plates.
Locknuts
FIGURE 7 - REMOVING/ INSTALLING VAN SEAT ASSEMBLY
REPLACING VAN SEAT AND/OR VAN SEAT FRAME (FIGURE 8)
1. Perform the instructions outlined in
PREPARATION FOR REMOVING/
INSTALLING SEAT FRAME (STANDARD
FRAME, ADJUSTABLE FRAME, AND | Van Seat | |
| ||
VAN SEAT) in this section of the manual. |
| |
2. Remove the van seat assembly from |
| |
the wheelchair. Refer to | Van Seat | |
INSTALLING/REMOVING VAN | ||
Frame | ||
SEAT ASSEMBLY in this section |
| |
of the manual. |
| |
3. Remove the four (4) mounting | Washer | |
screws, two (2) washers, and |
| |
two (2) spacers that secure the | Mounting Screw | |
van seat to the seat frame. | (Torque to | |
|
75
Spacer
FIGURE 8 - REPLACING VAN SEAT
AND/OR VAN SEAT FRAME
3G Storm Series® Wheelchairs | 40 | Part No. 1104849 |