RWD WHEELCHAIRS
SECTION 15 | RWD WHEELCHAIRS |
|
|
REPLACING SUSPENSION ARM FOR WHEELCHAIRS WITH GEARLESS/BRUSHLESS MOTORS (FIGURE 16)
1. Perform one (1) of the following:
A. Remove the seating system. | Suspension Arm | |
| ||
Refer to the Seating Systems |
| |
Owner’s Manual for removal/ | Beveled | |
installation instructions. | Washers | |
B. Remove the seat pan. Refer to | Plug | |
REMOVING/INSTALLING THE | ||
Button | ||
| ||
SEAT PAN in SECTION 6 of this |
| |
manual. | Suspension Arm Hex Screw | |
2. Remove the motor. Refer to | (1/2 x | |
| ||
REMOVING/INSTALLING THE | FIGURE 16 - REPLACING | |
MOTOR in SECTION 12 of this | SUSPENSION ARM FOR | |
manual. | WHEELCHAIRS WITH GEARLESS/ | |
3. Cut the | BRUSHLESS MOTOR | |
|
wiring harness/charger cable to the suspension arm.
4.Remove the
5.Remove the shock from the suspension arm. Refer to SHOCK OR RUBBER ELEMENT REPLACEMENT in this section of the manual.
6.Remove the plug buttons from the side of the base frame.
7.Remove the mounting screw and beveled washers that secure the front of the suspension arm to the base frame.
8.Remove the existing suspension arm from the base frame.
9.Install the new suspension arm onto the base frame.
10.Install mounting screw and beveled washers that secure the front of the suspension arm to the base frame.
11.Install the plug buttons into the side of the base frame
12.Install the shock onto the new suspension arm. Refer to SHOCK OR RUBBER ELEMENT REPLACEMENT in this section of the manual.
13.Install the motor onto the new suspension arm. Refer to REMOVING/INSTALLING THE MOTOR in SECTION 12 of this manual.
14.Install
15.Perform one (1) of the following:
A.Remove the seating system. Refer to the Seating Systems Owner’s Manual for removal/installation instructions.
B.Remove the seat pan. Refer to REMOVING/INSTALLING THE SEAT PAN in SECTION 6 of this manual.
3G Storm Series® Wheelchairs | 136 | Part No. 1104849 |
