Invacare Ranger X RWD, Torque SP RWD, Arrow RWD service manual Before 1/26/04

RWD WHEELCHAIRS SECTION 15

1.Determine the desired mounting position of the gearless/brushless motor. Refer to ACCEPTABLE MOUNTING POSITIONS FOR THE GEARLESS/BRUSHLESS MOTOR in this section of the manual.

2.Remove the 22NF battery box or group 24 battery boxes. Refer to

REMOVING/INSTALLING BATTERY BOXES in SECTION 9 of this manual.

3.If necessary, remove the battery box tray. Refer to REMOVING THE BATTERY BOX TRAY in this section of the manual.

4.Remove the drive wheel from the wheelchair. Refer to REMOVING/ INSTALLING DRIVE WHEELS in SECTION 12 of this manual.

Motor	Brake Release
	Shaft	Adjustment	Motor
		Screw	Release
			Lever

Suspension Arm

Washer Mounting Screws

FIGURE 13 - REPOSITIONING THE MOTOR - REPOSITIONING THE STANDARD GEARLESS/ BRUSHLESS MOTOR -

BEFORE 1/26/04

RWD WHEELCHAIRS

5.Loosen the adjustment screw that secures the motor release handle to the brake release shaft.

6.Remove the four (4) mounting screws and washers that secure the motor to the suspension arm.

7.Slide the motor forward or backward to the desired mounting position.

8.Secure the motor to the mounting position determined in STEP 1 and secure with the four (4) existing mounting screws and washers. Torque to 13 ft-lbs.

9.Securely tighten adjustment screw.

10.Reinstall the drive wheel to the wheelchair. Refer to REMOVING/INSTALLING DRIVE WHEELS in SECTION 12 of this manual.

11.Repeat STEPS 1-9 for opposite side of wheelchair.

12.If necessary, reinstall the battery box tray. Refer to REMOVING THE BATTERY BOX TRAY in this section of the manual.

13.Install the 22NF battery box or group 24 battery boxes. Refer to REMOVING/ INSTALLING BATTERY BOXES in SECTION 9 of this manual.

Part No. 1104849 133 3G Storm Series® Wheelchairs