GE 2800 manual Wall Case Installation - Cord Set Connected, Top View, Front View

29

		WALL CASE INSTALLATION – CORD SET CONNECTED
		Example: block and veneer – dimensional data and comments
	CAULK*		Are also applicable to other types of construction
FINISHED		CASE			CAULK*
EXTERIOR WALL		RAB71	42"				Manufacturer Required
		RAB77	42-1/8"		A	Dimension
							Minimum Installation Clearance
						A	1/4" (See note 1)
						B	Allow For Electrical Wiring 0" Min. (See page 27)
						C	0" Minimum
			RAB71	13-3/4"		D	0" Minimum 2" Recommended
							See pages 38-39 for ducted application.
	CAULK*		RAB77	13-7/8"	CAULK*
						E	3" Minimum
					C	NOTE:
						1. FOR OUTSIDE FLUSH MOUNTING SEE PAGE 35 FOR DRAIN INSTALLATION.
FINISHED	D	ROOM CABINET			D
EXTERIOR							MAX. WALL THICKNESS
WALL
		27-1/4"					13-1/8"
	2-1/2"
		TOP VIEW		ADJACENT WALL
ADJACENT WALL		*Caulk around perimeter of wall case all four sides
		where it joins the building - Interior and Exterior.					SIDE VIEW OF
				LINTEL			ALTERNATE
							HIGH MOUNT
							With conduit
							power supply.
						E	CAULK*
							A
		ROOM CABINET					CAULK*

				16" RAB71
WALL OPENING		INSIDE		16-1/8" RAB77
16-1/4" x 42-1/4" MIN. FOR RAB71			ROOM
16-1/2" x 42-3/8" MIN. FOR RAB77				RAB71 13-3/4"
			CABINET
			7-1/8"	RAB77 13-7/8"
			CAULK*	*Caulk around
				perimeter of wall case
		B	CONDUIT	all four sides where it
ELECTRICAL RECEPTACLE (BY OTHERS).			FIELD	joins the building -
	FRONT VIEW
FLUSH MOUNTED.			SUPPLIED	Interior and Exterior.
See page 42 for line cord length.		FINISH FLOOR

ge.com