GE 28115 manual Edit Records, Delete Records

6.Press the menu ok/mute button again to save your selection. The display shows ADD TEL NUMBER.

7.Use the touch-tone pad to enter the telephone number (up to 20 digits, including pauses), and press the menu ok/mute button to confirm, The records are stored alphabetically in the phone book.

Inserting a Pause in the Dialing Sequence (of a Stored Number)

Press the #PAUSE/RINGER button on the handset’s touch-tone pad to insert a delay in dialing sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence.

Edit Records

1.Make sure the phone is OFF (not in talk mode).

2.Press the mem button to access the phone book sub-menu.

3.Use the vol/CID ( 6 or 5) button to scroll to EDIT RECORDS.

4.Press the menu ok/mute u button to confirm, display will show the records.

5.Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press mem button to confirm, ENTER NAME shows on the display.

6.Repeat Steps 5 through 7 in “Add Records” section.

Delete Records

1.Make sure the phone is OFF (not in talk mode).

2.Press the mem button to access the phone book sub-menu.

3.Use the vol/CID ( 6 or 5) button to scroll to DELETE RECORDS.

4.Press the menu ok/mute button to confirm, display will show the records.

5.Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press the del/intercom/conf button, DELETE? shows on the display.

6.Press the del/intercom/conf button again to confirm.

NOTE: If you don’t want to change or delete a record, simply press the end button, or wait for one minute to exit automatically.

28