Dialing a Number from Internal Memory
1.Make sure the phone is OFF (not in talk mode).
2.Press the mem button to access the phone book
3.Use the vol/CID ( 6 or 5) button to scroll to VIEW RECORDS.
4.Press the menu ok/mute button to confirm
5.Use the vol/CID ( 6 or 5) button or key in alphabet to move to the desired number.
6.Press the talk or speaker buttons, the number dials automatically.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model
1.Make sure the telephone is OFF (not in TALK mode) before you replace battery.
2.Remove the battery compartment door.
3.Disconnect the cord attached to the battery pack and remove the battery pack from the handset.
4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.
5.Put the battery compartment door back on.
6.Place handset in the base to charge. Allow the handset battery to properly charge (for 12 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.
Battery Safety Precautions
•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.
•To reduce the risk of fire or personal injury, use only the Lithium battery listed in the User’s Guide.
•Keep batteries out of the reach of children.
•Remove batteries if storing over 30 days.
29
