GE 28127 Series Answering a Call, Cellular Calls, Use the or button to select the desired device

-OR-

Press the or button to select the desired record, then press the TALK or SPKR button on handset.

-OR-

Press and hold the number key to get the corresponding speed dialing number.

2.When finished, press the END/cancel button on the handset to hang up.

NOTE: You may enter up to 32 pre-dial digits.

NOTE: If you want to delete the pre-dial number you entered, press the DELETE/flash button until all of the digits are erased.

NOTE: To set the speed dialing number, refer to section “Phone Book -> Adding the Speed Dialing Number”.

Cellular Calls

1. In standby mode, dial the desired number, press Cell (SKR) button.

NOTE: If more than one bluetooth cell phone device is connected

use the or button to select the desired device.

2. Press Select (SKL) button to confirm.

4. Press the END/cancel button when finished.

Answering a Call

Check the display to see who is calling.

Landline Calls

1.Pick up the handset, and press the TALK or SPKR button on the handset.

2.When finished, press the END/cancel button on the handset, or place the handset in the cradle.

Cellular Calls

1.Pick up the handset, and press the Cell (SKR) button on the handset.

2.When finished, press the END/cancel button on the handset, or place the handset it the cradle.

Receiving a Landline Call during a Cellular Call

During a cellular call, if you receive an incoming landline call.

35