GE 28127 Series manual Connecting the Belt Clip, Connecting Optional Headset, Changing the Battery

Deleting a CID Record

1.Make sure the phone is OFF (not in TALK mode).

2.Press the button.

3.Press the View (SKL) button.

4.Use the or button to scroll to the CID record.

5.Press the DELETE/flash button to show DELETE?.

NOTE: To delete all CID records, press and hold the DELETE/flash button.

6. Press the Yes (SKL) button to confirm the deletion. The screens displays DELETED.

NOTE: Press the No (SKR) button to return to the stand-by mode or if no action is taken, it will exit automatically after one minute.

Connecting the Belt Clip

1.To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset.

2.Snap the ends of the belt clip into place.

Connecting Optional Headset

Each handset can be used with an optional headset for hands free operation.

1.Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are disabled when the headset is connected.

2.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.

3.Press the TALK button to answer a call or make calls using the headset.

4.To return to normal operation, unplug the headset from the jack.

Changing the Battery

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved model 5-2840 Nickel-metal Hydride battery (Ni-MH), which is compatible with this unit.

1. Make sure the telephone is OFF (not in TALK mode) before you replace the battery.

44