GE 28127 Series manual Caller ID Solutions, Battery Solutions

•Disconnect the power adaptor and plug it in again. Then place the handset on the cradle for at least 2 to 3 minutes.

Handset displays HANDSET NEEDS REGISTRATION

•Follow the programming in the telephone procedures to re-register the handset to the base.

•Press the Select (SKL) button to begin handset registration. Follow instructions on Handset screen.

Caller ID Solutions

No Display

•Charge the battery (for 16 hours). Or replace the battery.

•Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the AC power adaptor from the base and reconnect it.

Caller ID Error Message

•The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates the presence of noise on the line.

No Caller ID

•In order to receive Caller ID information, you must subscribe to the standard name/number Caller ID service from your local telephone company.

Battery Solutions

If you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack:

•Short talk time

•Poor sound quality

•Charge indicator on the cradle fails to illuminate.

•Limited range

49