Wall Mounting
1.Plug the AC power adaptor into the electrical outlet and the DC connector into the jack on the back of the base.
2.Plug one end of the straight telephone line cord into the jack on the bottom of the base.
3.Close the
on the bottom of the base unit if you’ve opened them before.
4.Feed the line cord through the groove and plug the end into the modular telephone
jack. Excess telephone line can be stuffed into the recess area on the bottom of the Base Unit.
5.Slip the mounting holes
(on the bottom of the base) over the wall plate posts and firmly slide the unit down into place.
6.Make sure the DESK/WALL MOUNT tab is rotated to the WALL position.
17
