Garage Door Sensor F.A.Q.’S
Q.I bought a new Sensor and the Control Center will not recognize it. Why?
A.First, make sure that the yellow battery isolation tape has been removed and that the battery is new. Second, ensure the battery is inserted into the Sensor according to
Q.I put the Sensor on Zone 4 and it will not set off the alarm. Why?
A.Zone 4 is a Dedicated Alert Zone and is designed to monitor Sensors in this Zone. It will only issue an alert (LED will flash, continuous beeping will be heard). Sensors in Zone 4 will not set off the alarm. Use Zone 4 for water Sensors, garage doors, gates, sheds or other areas that you want to monitor (i.e. areas that you want to be alerted if there is a problem, but do not want the alarm to sound).
Q.I erased a Sensor from a Zone and now all of my other Sensors in that Zone will not work. Why?
A.The system can only erase entire Zones. You will need to add the other Sensors back in that Zone to the Control Center again.
12
