8
3.Drill three 1/8” holes in mounting location and insert wall anchors provided. Position wall bracket over the anchors and install screws or
screw directly into a stud.
4. Run the 60’ cable from the camera’s location to the location of the Monitor. Use the cable clips provided to keep the cable in place. (See Notes on Cable Installation.)
5.Adjustments can now be made to the camera viewing angle by loosening
the adjustment knob and tilting and rotating the camera head.
NOTES ON CABLE INSTALLATION
1.Use care when running the cable from the camera to the TV, VCR or DVR; when securing the cable, do not cut, pierce or puncture. DO NOT RUN CABLE INSIDE WALLS.
2.Keep the camera cable away from other cables where possible, in order to reduce the risk of picture and audio interference.
