DELETING A DEVICE (LIGHT / NODE) FROM YOUR NETWORK
This completely removes the device from your home control network and
resets the device to its factory default settings.
Press and hold SETUP until screen displays LGHT SETUP
Press OK followed by pressing the cursor right key 2 times the
screen will display DELETE.
Press OK.
Press the button on the device so that it communicates with the
remote.
When the screen displays SUCCESS, you have successfully deleted
the node/light from your network.
GROUPS
You can create a collection of devices (lights /nodes) that you can control
as a group. You can set up a maximum of 18 groups. A group can
contain up to 232 devices.
To create or add a device to a group:
Press and hold SETUP until screen displays LGHT SETUP.
Use either Arrow key to scroll until the display reads GRP SETUP.
Press the OK key and the screen will display ADD.
Press OK and the screen will display SEL DIGIT.
Press a digit (1-9) for the group you wish to add the device to. Press
SHIFT and the digit (1-9) if you are adding a device to groups 10
through 18.
Press the OK key and the screen will display SETUP WAITING.
Press the button on the device so that it communicates with the
remote.
When the screen displays SUCCESS, you have successfully added
the device to your group.
To control a Group:
Press GROUP once to put the remote into “GROUP Control” mode.
The screen will display GROUP. The remote will stay in this mode
until the Light, Scene or All mode is activated.
Press the digit key for the group you wish to control (1-9). Press
SHIFT and the digit (1-9) if you are controlling groups 10 through 18.
The screen will display the selected Group.
- To turn a GROUP on, press and release the ON key for less than one
second. The screen will display the selected GROUP and ON.
- To turn a GROUP OFF, press and release the OFF key for less than one
second. The screen will display the selected GROUP and OFF.
Removing a Device (Light / Node) from a Group:
This only removes the device from a specific group. The device is still
part of your home control network and the group still exists (if there were
more than one device in it to start).
Press and hold SETUP until the screen displays LGHT SETUP.
Use either Arrow key to scroll until the display reads GRP SETUP.
Press the OK key followed by the cursor right key once and the
screen will display REMOVE.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
1.
2.
3.