Installation Instructions
TOOLS REQUIRED
•#2 Phillips screwdriver
•Adjustable wrench
PARTS SUPPLIED
•Hardware for changing door swing
•Left and right side hinge covers
•Top screw hole cover
GROUNDING THE WINE CHILLER AND BEVERAGE CENTER
IMPORTANT– Please read carefully.
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
The power cord of this appliance is equipped with a
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Where a standard
it is your personal responsibility and obligation to have it replaced with a properly grounded
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A
DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
STAINING WOOD DRAWER FRONTS
The drawer fronts are unfinished beech wood. During use, oil from hands may accumulate and stain the wood.
•The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened.
•Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/sealer to dry completely before using the product.
1REMOVE PACKAGING
•Remove corner blocks and foam drawer stops.
•Remove all packing material, tape and protective plastic coverings.
CAUTION: Small objects are a choke hazard for children. Remove and discard any parts not used.
10