Safety Instructions

 

 

Operating

Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

ATTENTION CONSUMER!

This appliance is designed for storing and cooling beverages. Do not store perishable foods in this unit.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Care and Cleaning

This appliance must be properly installed and located in accordance with these instructions before it is used.

Do not allow children to climb, stand or hang on the shelves or full-extension drawers in the appliance. They could damage the appliance and seriously injure themselves.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Before replacing a burned-out light bulb, the appliance should be unplugged in order to avoid contact with a live wire filament.

(A burned out light bulb may break when being replaced.)

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

Unplug the appliance before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Do not store or install this appliance outdoors.

Installation

Instructions

Tips

Consumer Support

Troubleshooting

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE WINE CHILLER

OR BEVERAGE CENTER

Child entrapment and suffocation are not

Refrigerants

problems of the past. Junked or abandoned

All refrigeration products contain refrigerants,

refrigeration products are still dangerous… even

which under federal law must be removed prior to

if they will sit for “just a few days.” If you are

product disposal. If you are getting rid of an old

getting rid of your old appliance, please follow

refrigeration product, check with the company

the instructions below to help prevent accidents.

handling the disposal about what to do.

Before You Throw Away Your Old

 

Refrigeration Product:

 

Take off the door.

Leave the shelves and drawers in place so that children may not easily climb inside.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

2

Page 2
Image 2
GE 49-60451, 197D7188P001 operating instructions Operating Instructions, Care and Cleaning, Tips Consumer Support

197D7188P001, 49-60451 specifications

The GE 49-60451, also known as 197D7188P001, is a vital component within the domain of gas turbine technology, primarily utilized in the aerospace industry. Designed to optimize engine performance and enhance reliability, this model represents the cutting-edge advancements in aircraft propulsion systems.

One of the key features of the GE 49-60451 is its superior materials engineering. It incorporates high-temperature alloys and advanced composite materials that withstand the extreme conditions encountered during flight. This ensures durability and longevity, enabling the turbine to operate efficiently over extended periods, while resisting thermal fatigue and corrosion.

The technology behind the GE 49-60451 revolves around innovative aerodynamics. The design utilizes advanced computational fluid dynamics (CFD) simulations, allowing for the optimization of airflow through the turbine stages. This results in improved thrust-to-weight ratios and enhanced fuel efficiency, which are critical factors in modern aviation where cost-effectiveness is paramount.

Another notable characteristic of the GE 49-60451 is its modular design. This allows for easier maintenance and faster turnaround times in aircraft servicing. The modular approach not only facilitates efficient diagnostics and repairs but also aids in the rapid replacement of components, reducing downtime and enhancing operational availability.

Additionally, the integration of digital technologies is a significant aspect of the GE 49-60451. With the advent of the Internet of Things (IoT), this model is equipped with advanced sensors that monitor various operational parameters in real time. This data is vital for predictive maintenance, enabling operators to preemptively address issues before they escalate, thereby ensuring safer and more reliable flights.

The GE 49-60451 also adheres to stringent environmental standards. Its design emphasizes reduced emissions and lower noise levels, aligning with global initiatives to make aviation more sustainable. The combination of these features contributes to less environmental impact, meeting the needs of modern regulatory frameworks.

In conclusion, the GE 49-60451, or 197D7188P001, stands out for its exceptional engineering, cutting-edge technology, and commitment to sustainability. Its high-performance capabilities make it an indispensable component in the future of aviation propulsion systems, ensuring that operators benefit from both efficiency and reliability while minimizing their environmental footprint.